Key Takeaways
- You can clear white stains from your faucet by using plain items at home such as vinegar and water. It is an easy way that keeps your tap neat without using strong cleaners.
- Cleaning the faucet often helps stop more stains from forming. When you wipe it each week, it stays bright and smooth for a long time.
- Try not to use sharp tools or strong scrubs on the tap. These can leave marks and make the metal lose its shine.
- If the stains stay even after you clean, you can call Lew Plumbing. Their team can check your pipes and fix the issue safely.
You might often see tiny spots on your tap that will not go away. These marks come from hard water. Canada has only about 7 percent of the world’s renewable fresh water. That means many people face this same problem. But there is good news. You can clean the calcium and make your faucet shine again.
In this blog Lew Plumbing will explore everything you need to know.
What Causes Calcium Buildup in Faucets
It is because of the minerals present in hard water. When this water comes out of the faucet it leaves small bits behind. These bits stick to the metal and dry there. After some time white spots or crusts start to show.
If no one cleans them the buildup gets thick. It can block the water and hurt the faucet. The handle may also get tight. When you clean it early the faucet stays strong. It will last long and the water will flow well.
How to Tell If You Have Calcium Buildup
These are signs that something is blocking the inside.
- You can tell there is a problem when white marks show on the faucet.
- The water may come out slow or not straight.
- The handle may feel tight when you turn it.
To check it
- Look at the small round part at the tip of the faucet.
- This part is called an aerator. Take it off and see if there is white dust or crust.
- If you see that it means the faucet needs cleaning.
You can call emergency plumbers for help if you are not sure what to do.
How to Remove Calcium Build Up On Faucet
You do not need fancy tools to clean it. You need to get
- A cup of white vinegar
- Baking soda
- Soft cloth
- Small brush like an old toothbrush
After gathering the tool;
- Dip the cloth in vinegar and put it around the faucet.
- It helps break the white marks.
- After that take the brush and scrub it softly.
- Do not press too hard so the metal stays safe.
- Rinse the faucet and dry with towel to make it shiny.
How to Clean Buildup in Faucet Aerator
At the end of the faucet there is a small round piece with tiny holes. This part is called the aerator. It mixes air with water and helps the flow stay even. But it can get blocked with white dust.
- Turn it slowly to take it off.
- Put it in a small bowl of vinegar for a short while.
- After that use a brush to clean the tiny holes.
- Rinse it well and put it back in place.
If the water still does not flow right or your faucet drips check our guide here. Call lew plumbing for help.
Safe Cleaning Tips to Remove Calcium from the Faucet
Here is what you can do.
- Use only soft cleaners.
- Never use strong chemicals or sharp tools because they can scratch the faucet.
- After each use wipe the faucet with a dry cloth. This helps stop white spots from coming back.
- If your water has too many minerals use a water softener. It keeps your faucet shiny for a long time.
If the white crust is too thick or the water comes out very slow, it is time to call Lew Plumbing. Our team knows how to clean faucets the right way. We can also change parts that do not work well anymore. Call Lew Plumbing for expert plumbing repair.
FAQs
Can vinegar damage the color?
No it is safe if you do not leave it too long. Always rinse with water and dry after cleaning.
How often should I clean It?
Clean it once every week to stop white marks from forming.
What if the spots do not go away?
If the spots stay call Lew Plumbing. We can help fix the problem safely.
