Blog/tips

Why Do Pipes Make Banging Noises During Cold Weather?

If your pipes seem louder when the weather turns cold, there may be a connection.

October 27, 20268 min read
Why Do Pipes Make Banging Noises During Cold Weather?
Lew Plumbing & Heating· Since 1994
1994
Family-run since
Same-day
& weekend service
100%
Work guarantee
中文
We speak Mandarin

You might hear a sharp bang when the washing machine stops filling, a ticking sound after someone turns on the hot water, or a dull knock somewhere inside a wall. These noises do not all mean the same thing. Some come from normal pipe movement.

Others can point to loose supports, water hammer, trapped air, or a problem that needs attention.

Here are the common causes of banging, knocking, and ticking pipes in winter, and what you can do about them.

Thermal Expansion and Contraction

Pipes change slightly in length as their temperature changes. Hot water pipes warm up and expand, then contract again as they cool.

That movement is small, but you can still hear it.

If a pipe passes tightly through a floor joist, wall framing, or a snug pipe hanger, it may rub against the surrounding material as it moves. The result is usually a tick, click, creak, or light popping sound rather than one heavy bang.

You may notice it first thing in the morning when someone runs a hot shower, or after the hot water has not been used for a while.

If the noise starts with hot water use and fades as the pipe warms up, expansion is a likely cause.

It is usually more annoying than urgent. One useful check is whether the same sound comes back as the pipe cools. That repeated warm up and cool down pattern points more toward movement than a sudden pressure problem.

What to do: If the sound bothers you or is getting louder, a plumber can look for a tight opening or support point and add cushioning or adjust the pipe so it can move without rubbing against the framing.

Water Hammer

Water hammer is different.

It is usually a sharper bang that happens right when water flow stops. A quick closing valve stops moving water suddenly, creating a pressure shock in the line. That shock can make the pipe jump or hit nearby framing.

Washing machines and dishwashers are common places to notice it because their valves can close quickly. You may also hear it when a toilet finishes filling or when a faucet is shut off fast.

Cold weather does not create water hammer by itself, so listen for the pattern.

If the bang happens at the exact moment an appliance stops filling or a valve closes, water hammer is more likely than thermal expansion. If it happens at one fixture only, tell the plumber which fixture triggers it. That can make the source much easier to narrow down.

Repeated pressure shock is worth fixing because it can stress valves, fittings, and pipe supports over time.

What to do: A water hammer arrestor can be installed near the fixture or appliance causing the shock. The device absorbs the pressure change instead of letting the full force travel through the pipe.

Water pressure should also be checked if the banging is happening in several places around the house. Under BC Plumbing Code requirements, if static water pressure can exceed 550 kPa (80 psi), a pressure-reducing valve must be installed to keep the pressure within that limit.

Loose Pipe Hangers

Pipes need support so they stay in place as water moves through them.

Hangers and straps do that job. Over time, a support can loosen, corrode, or pull away from the framing. A pipe may then move enough to tap against a joist, stud, or another pipe.

Temperature changes can make that movement easier to notice because the pipe is already expanding and contracting.

In an unfinished basement or crawl space, you may be able to see a loose section move when water starts or stops. Inside a finished wall, you may only hear the knock.

What to do: Accessible loose supports can sometimes be tightened or replaced. Do not clamp a pipe so tightly that it has no room for normal movement.

If the noise is inside a finished wall or ceiling, a plumber can narrow down the location before deciding whether the area needs to be opened.

Trapped Air in the Lines

Trapped air sounds different again.

Instead of one clean bang, you may hear sputtering, knocking, or an uneven sound when a faucet is first opened. The water may spit for a moment before the flow becomes steady.

This often happens after plumbing work or a water shutoff, when lines are drained and filled again.

Winter can make this more noticeable if you have recently shut down and drained outdoor plumbing, but cold weather itself is not usually the reason air suddenly appears in a pressurized water line.

What to do: If the problem started after the water was shut off, run the affected fixtures until the flow becomes steady. If several faucets sputter, work through them one at a time.

If the sputtering keeps returning without any recent plumbing work or water shutoff, have a plumber check it, or call an emergency plumber in Vancouver if it comes with a leak or a sudden drop in pressure. Ongoing air in the water can have other causes and is better diagnosed than repeatedly flushed.

If only one faucet is affected, the issue may also be local to that fixture rather than the whole plumbing system.

Pipes Expanding Against Framing

This is closely related to thermal expansion, but homeowners often describe it as a separate noise because it can be very regular.

A hot water pipe may pass through a hole in wood framing with very little space around it. As the pipe warms, it slides slightly against the wood. You hear a series of ticks or creaks.

As it cools later, you may hear the same type of sound again.

The important clue is that the noise follows hot water use and usually settles once the pipe temperature stops changing.

What to do: If the exact contact point can be found, a plumber may be able to add a sleeve or other cushioning around the pipe, or adjust the support so the pipe has a little room to move.

It is usually a comfort issue rather than an emergency.

When Banging Pipes Are a Warning Sign

Most pipe noise does not mean a pipe is about to burst.

Still, some signs need more attention.

Call a plumber if:

  • The noise starts during or after a hard freeze and a nearby faucet suddenly has very low flow or no water.
  • You hear a bang and then notice water running, dripping, or staining a wall or ceiling.
  • Water pressure drops suddenly in part or all of the house.
  • You hear hissing and can also see moisture or other signs of a leak.
  • A pipe that used to be quiet has started banging hard every time a fixture or appliance runs.

Reduced or no flow after freezing weather can point to a frozen section of pipe. Do not rely on the sound alone to decide whether a pipe is frozen.

If you see active leaking or suspect a split pipe, shut off the main water supply if it is safe to do so and call a plumber.

Lew Plumbing & Heating serves Vancouver, Burnaby, Coquitlam, New Westminster, North Vancouver, Port Coquitlam, Port Moody, Richmond, and West Vancouver.

Contact us if the banging is new, getting worse, or comes with a change in water flow or pressure.

FAQ

Is it normal for pipes to bang in winter but not in summer?

Yes. Cold weather causes pipes to contract, makes loose hangers more pronounced, and can make existing water hammer easier to notice. You may hear sounds in January that you never noticed in August. Most of the time the cause is thermal expansion or a loose hanger rather than anything urgent.

Why do my pipes bang when the heat comes on?

Usually it is thermal expansion. In a home with hot water heating (a boiler with radiators or in-floor loops), hot water starts circulating through pipes that cooled and contracted overnight. The pipes expand slightly as they warm, and if they are running through tight spots in the framing, you hear that movement as a tick, creak, or knock.

Can water hammer damage my pipes?

Repeated water hammer can put extra stress on valves, fittings, and pipe supports.

If the noise happens regularly, it is worth finding the source. A water hammer arrestor may solve a fixture-specific problem, while widespread banging may call for a water pressure check as well.

What is the difference between water hammer and a frozen pipe?

Water hammer is a sharp bang tied to a specific event, like a valve closing or an appliance switching cycles.

A frozen pipe usually shows up as reduced or no flow at a nearby faucet, not as a particular sound. If you hear a bang and then notice the water pressure has dropped, treat it as a frozen pipe situation until a plumber confirms otherwise.

Do I need a plumber or can I fix noisy pipes myself?

It depends on where the noise is coming from.

If an exposed pipe has an obviously loose support, the fix may be simple. Running a faucet to clear temporary trapped air after a water shutoff can also be straightforward.

Anything inside a finished wall, repeated water hammer, pressure problems, a suspected frozen pipe, or signs of a leak are better handled by a plumber.

No heat, no hot water, or a leak right now?

Call day or night.

Get started

Request service

Prefer to talk? Call 604-205-9436. Or send the form and we will get back to you fast.

Need it fixed today?

Same-day and weekend service. You will know the price before we start.

Licensed & insuredWCB registered100% work guaranteeSince 1994
Call Now: 604-205-9436
Call 604-205-9436